API 5L Carbon Steel Pipe

Source API 5L Carbon Steel Line Pipe with API 5L edition, grade, PSL1 or PSL2, and project supplementary requirements, dimensions, process, ends, hydro and NDT scope, MTC, packing, quantity, and destination confirmed before quotation.

Request a Quote WhatsApp Contact Technical Sales

PRODUCT ORDER SPECIFICATION CONFIRM FOR QUOTATION

KEY SPECIFICATIONS

Standard: API 5L Standard reference
Material: Carbon Steel
Product form: Pipe

Technical classification

Material / substrate: Carbon Steel
Form: Pipe
Application: Oil & Gas

API 5L pipe: choose grade, PSL and manufacturing route

These references explain product selection. Availability, dimensions, minimum order quantity and delivery time depend on the requested specification and are confirmed in the quotation and purchase order.

API 5L pipe: choose grade, PSL and manufacturing route
Selection reference	Typical use or scope	What to check
Grade and PSL	API 5L line pipe is specified by grade and product specification level.	Write PSL1 or PSL2 explicitly and identify delivery condition. Do not infer project suitability from the grade alone.
Seamless or welded	The project specification determines which manufacturing routes are permitted.	State the route with OD, wall thickness, length, ends and coating. Compare quotations on the same basis.
Inspection and service	Mechanical, chemical and nondestructive test requirements depend on the ordered specification.	Define the applicable edition, service restrictions and any additional inspection requirements in the purchase order.

Inspection and shipment documents

Link pipe markings, heat identity and the mill certificate. Confirm the ordered PSL, dimensional inspection, hydrostatic and NDT requirements before accepting the inspection plan.

Check product standard references Review certificates and their scope Review inspection and quality controls

Product specifications

Send grade, standard, dimensions, and delivery requirements for a matched product quotation.

Product specifications
Property	Value
Product identity
Product	API 5L Carbon Steel Pipe
Material	Carbon Steel
Product form	Pipe
Standards and classification
Standard	API 5LSelection reference; certification to this standard requires order review.
Parameters to include in your inquiryProvide the following values for review together with quantity, destination port and required delivery date.
Grade	Exact grade under the chosen standard; include service and forming requirements.
Outer diameter	Outside diameter in mm, or NPS/DN with the applicable dimensional standard.
Wall thickness	Wall thickness in mm and tolerance, or schedule with NPS and the dimensional standard.
Manufacturing process	Required ERW, LSAW or SSAW route and any project restrictions on forming or welding.

Overview

API 5L line pipe should be quoted from the pipeline material specification, not from grade and diameter alone. The RFQ needs PSL, manufacturing route, service conditions, actual wall, toughness and sour-service requirements, coating, bevel, hydrotest, weld NDT, traceability, and data-book scope. Send the complete order designation, dimensions, quantity, inspection requirements, packing method, and destination port. The quotation can then address availability, production timing, EN 10204 3.1 documentation, inspection options, export packing, and delivery terms for the requested specification.

Applications

Onshore oil and gas transmission lines
Water, slurry, and utility pipelines when the project permits API 5L
Pipeline crossings and project line-pipe packages

Surface options

Bare or light-oiled with identified storage requirements
Black shop coating or galvanized finish when the governing specification permits
Project external coating or internal lining with cutback and holiday-test requirements stated

Processing & form

Fixed or random length with tolerance stated
Plain, beveled, threaded, or grooved ends as ordered
Hydrostatic testing and NDT method, coverage, and acceptance by standard or PO
Bundle identity, end protection, and export marking by heat or lot when required

RFQ documents & delivery

Packing, MTC, and inspection path — include them in your RFQ for an actionable quote.

Packing & delivery

Export packing options

Pipe and hollow-section lots are bundled by size and heat or lot where traceability is required. Export packing can include steel straps, waterproof wrapping, lifting points, bevel or thread protectors, end caps, and durable shipping marks. Bundle weight, loose-loading restrictions, container limits, discharge method, destination port, and any break-bulk lashing plan are confirmed before loading.

Quality assurance

Quality documents

Inspection is agreed against the purchase order, governing product standard, and any approved inspection and test plan. The review can cover grade and heat identity, dimensions, wall thickness, end preparation, visual condition, coating, hydrostatic testing, and NDT records where applicable. EN 10204 3.1 documentation and third-party witness points must be requested before production is released.

Export packing & loading evidence

Representative export packing and loading evidence. Final packing follows the approved order.

FAQ

What should an RFQ for API 5L Carbon Steel Pipe include?

State standard and edition, grade, manufacturing process, NPS or OD, actual wall or schedule, length, ends, coating, hydro and NDT scope, quantity, packing, and destination. A complete line-item specification is required before manufacturing route, availability, inspection, and packing can be confirmed.

What quality documents are available for API 5L Carbon Steel Pipe?

The ordered document pack can include mill certificates, lot or heat identity, dimensional and visual inspection records, and product-specific test reports. Third-party inspection must be agreed before production or stock allocation.

How is API 5L Carbon Steel Pipe packed for export?

Packing is selected from the product form, unit weight, handling method, destination climate, container or break-bulk limits, and discharge plan. Confirm the destination port and any storage constraints on the RFQ.

What information is needed to quote API 5L Carbon Steel Pipe?

Send the required grade or standard, dimensions, quantity, destination port and application. Add surface, processing, packing or inspection requirements when they affect the order.

How should I select the grade or standard for API 5L Carbon Steel Pipe?

Use the project specification and end use as the starting point. Share any required reference such as API 5L, X42, X80, API5L, together with forming, welding, corrosion or service conditions, so the quotation follows the intended application.

What affects the quotation for API 5L Carbon Steel Pipe?

The material specification, dimensions, quantity, processing, surface, packing and destination all affect the quotation. Final commercial terms are provided against the submitted RFQ.

Compare, specify, then quote

Keep the grade in its governing standard. Use these procurement resources to confirm dimensions, quantity, inspection scope and destination.

Required RFQ fields

grade, standard and PSL where applicable
manufacturing route and pipe type
OD, wall thickness or schedule, and length
end finish and coating requirement
hydrostatic and NDT scope
quantity and destination port
MTC, marking and export packing

Request a Quote

Request a quote for API 5L Carbon Steel Pipe

Send the complete API 5L Carbon Steel Pipe specification, quantity, inspection scope, packing preference, and destination port for review.

Request a Quote Check details on WhatsApp

RFQ form: itemized quote, MTC and packing requirements
WhatsApp: quick check of specifications, quantity and port