X80

API 5L X80 Welded Steel Pipe

Source API 5L X80 Welded Line Pipe with API 5L X80, PSL2 where specified, plus project chemistry, toughness, DWTT, and weld controls, dimensions, process, ends, hydro and NDT scope, MTC, packing, quantity, and destination confirmed before quotation.

Request a Quote WhatsApp Contact Technical Sales

PRODUCT ORDER SPECIFICATION CONFIRM FOR QUOTATION

KEY SPECIFICATIONS

Grade: X80
Standard: API 5L Standard reference
Manufacturing process: welded-unspecified
Material: Carbon Steel
Product form: Pipe

Technical classification

Material / substrate: Carbon Steel
Form: Pipe
Process: Welded, Method to Confirm
Application: Oil & Gas

X80 welded line pipe: keep grade and project requirements together

These references explain product selection. Availability, dimensions, minimum order quantity and delivery time depend on the requested specification and are confirmed in the quotation and purchase order.

X80 welded line pipe: keep grade and project requirements together
Selection reference	Typical use or scope	What to check
API 5L X80	A high-strength line-pipe grade used where the pipeline design specifies it.	Confirm PSL, delivery condition and the permitted welded route. X80 alone is not a complete purchase designation.
Fabrication and welding	Pipe properties and the joining procedure must fit the project design.	Review welding procedure qualification, toughness and any service-specific conditions with the project engineer.
Dimensions and inspection	OD, wall, length, end geometry and coating define the actual line item.	Provide the material take-off and the required inspection and documentation scope.

Inspection and shipment documents

Check grade and heat traceability, mechanical results, weld inspection, dimensions and the ordered coating records. Additional service qualifications must be specified separately.

Check product standard references Review certificates and their scope Review inspection and quality controls

Product specifications

Send grade, standard, dimensions, and delivery requirements for a matched product quotation.

Product specifications
Property	Value
Product identity
Product	API 5L X80 Welded Steel Pipe
Grade	X80
Material	Carbon Steel
Product form	Pipe
Standards and classification
Standard	API 5LSelection reference; certification to this standard requires order review.
Process and connections
Manufacturing process	welded-unspecified
Parameters to include in your inquiryProvide the following values for review together with quantity, destination port and required delivery date.
Outer diameter	Outside diameter in mm, or NPS/DN with the applicable dimensional standard.
Wall thickness	Wall thickness in mm and tolerance, or schedule with NPS and the dimensional standard.

Overview

API 5L X80 welded pipe is a project-controlled high-strength line-pipe item. It requires a complete material specification covering manufacturing route, delivery condition, PSL, chemistry, toughness and fracture-control program, weld NDT, hydrotest, dimensional controls, coating, traceability, and engineering approval. Send the complete order designation, dimensions, quantity, inspection requirements, packing method, and destination port. The quotation can then address availability, production timing, EN 10204 3.1 documentation, inspection options, export packing, and delivery terms for the requested specification.

Applications

High-pressure transmission pipeline packages
Large-diameter onshore line pipe
Project-controlled high-strength pipeline sections

Surface options

Bare or light-oiled with identified storage requirements
Black shop coating or galvanized finish when the governing specification permits
Project external coating or internal lining with cutback and holiday-test requirements stated

Processing & form

Fixed or random length with tolerance stated
Plain, beveled, threaded, or grooved ends as ordered
Hydrostatic testing and NDT method, coverage, and acceptance by standard or PO
Bundle identity, end protection, and export marking by heat or lot when required

RFQ documents & delivery

Packing, MTC, and inspection path — include them in your RFQ for an actionable quote.

Packing & delivery

Export packing options

Pipe and hollow-section lots are bundled by size and heat or lot where traceability is required. Export packing can include steel straps, waterproof wrapping, lifting points, bevel or thread protectors, end caps, and durable shipping marks. Bundle weight, loose-loading restrictions, container limits, discharge method, destination port, and any break-bulk lashing plan are confirmed before loading.

Quality assurance

Quality documents

Inspection is agreed against the purchase order, governing product standard, and any approved inspection and test plan. The review can cover grade and heat identity, dimensions, wall thickness, end preparation, visual condition, coating, hydrostatic testing, and NDT records where applicable. EN 10204 3.1 documentation and third-party witness points must be requested before production is released.

Export packing & loading evidence

Representative export packing and loading evidence. Final packing follows the approved order.

FAQ

What should an RFQ for API 5L X80 Welded Steel Pipe include?

State API 5L edition, X80 and PSL, process, delivery condition, OD, wall, length, toughness and DWTT criteria, sour-service status, weld NDT, hydro, coating, quantity, and destination. A complete line-item specification is required before manufacturing route, availability, inspection, and packing can be confirmed.

What quality documents are available for API 5L X80 Welded Steel Pipe?

The ordered document pack can include mill certificates, lot or heat identity, dimensional and visual inspection records, and product-specific test reports. Third-party inspection must be agreed before production or stock allocation.

How is API 5L X80 Welded Steel Pipe packed for export?

Packing is selected from the product form, unit weight, handling method, destination climate, container or break-bulk limits, and discharge plan. Confirm the destination port and any storage constraints on the RFQ.

What information is needed to quote API 5L X80 Welded Steel Pipe?

Send the required grade or standard, dimensions, quantity, destination port and application. Add surface, processing, packing or inspection requirements when they affect the order.

How should I select the grade or standard for API 5L X80 Welded Steel Pipe?

Use the project specification and end use as the starting point. Share any required reference such as X80, API 5L, API 5L, together with forming, welding, corrosion or service conditions, so the quotation follows the intended application.

What affects the quotation for API 5L X80 Welded Steel Pipe?

The material specification, dimensions, quantity, processing, surface, packing and destination all affect the quotation. Final commercial terms are provided against the submitted RFQ.

Compare, specify, then quote

Keep the grade in its governing standard. Use these procurement resources to confirm dimensions, quantity, inspection scope and destination.

Required RFQ fields

grade, standard and PSL where applicable
manufacturing route and pipe type
OD, wall thickness or schedule, and length
end finish and coating requirement
hydrostatic and NDT scope
quantity and destination port
MTC, marking and export packing

Request a Quote

Request a quote for API 5L X80 Welded Steel Pipe

Send the complete API 5L X80 Welded Steel Pipe specification, quantity, inspection scope, packing preference, and destination port for review.

Request a Quote Check details on WhatsApp

RFQ form: itemized quote, MTC and packing requirements
WhatsApp: quick check of specifications, quantity and port