Construction and structural projects
Confirm grade, OD, wall thickness, length and end finish for installation compatibility.
Welded pipe sourcing for projects
ERW Steel Pipe Supplier
Source ERW steel pipe for construction, structural, water and general industrial applications with standard, OD, wall thickness, length and inspection needs confirmed.
Standard / grade
ASTM A53 / API 5L / EN 10219 / ASTM A500
NPS / DN range
NPS 1/2-24 (DN15-DN600); larger OD reviewed separately
Wall basis
About 1-17.5 mm; Sch 40 / Sch 80 / STD / XS reviewed by NPS
Length / ends
Fixed or random length; PE / BE / threaded / capped as ordered
Send Dammam, Jebel Ali, Jeddah, Hamad, Sohar or another destination port for a current CFR/CIF freight check.
Redacted EN 10219 MTC specimen
This hollow-section specimen shows the heat-lot document format. Final ASTM A53 or API 5L documents follow the ordered standard and actual production lot.
View MTC specimenSpecification fit
Confirm the buying parameters before quotation
These are the usual fields importers and project buyers confirm before the commercial quote is prepared.
| Item | Common options to confirm |
|---|---|
| Standard | ASTM A53, API 5L, EN 10219, ASTM A500 or a confirmed project specification |
| Grade | Carbon steel grade confirmed against the required standard |
| Outside diameter | About 21.3–660 mm common ERW range; confirm nominal OD in inquiry |
| Wall thickness | About 1–17.5 mm common range; confirm schedule, nominal wall and tolerance |
| Length | Fixed length, random length or buyer-specific length |
| End finish | Plain end, beveled end, threaded or capped if required |
| Surface and packing | Black, oiled, painted, galvanized, bundled or seaworthy packing |
| MOQ / lead time | Typically one container; trial lots reviewed case by case. Typical production lead time is 7–21 working days after order confirmation |
Buyer use cases
Built for importers, distributors and project buyers
Water and general industrial use
Align standard, surface protection and inspection scope with project specification.
Importers and distributors
Plan repeatable pipe sizes, bundle packing and documentation for stock programs.
Procurement control
Inspection, pipe ends and heat-lot documents
ERW pipe inspection is agreed against the ordered standard, grade, application and approved inspection and test plan.
- Hydrostatic testing and weld NDT method or coverage follow the ordered standard, PSL and project ITP.
- Plain, beveled, threaded or capped ends are confirmed before production and packing release.
- EN 10204 3.1 MTC and optional third-party inspection are coordinated against the actual heat or lot.
Procurement control
Bundle packing and shipment coordination
Pipe packing should protect pipe ends, surface and bundle labels while staying practical for container loading and unloading.
- Bundle weight, traceable labels, end caps and waterproof protection are confirmed by order.
- Container loading plan depends on pipe length, bundle dimensions and destination constraints.
- CFR or CIF freight can be checked for Dammam, Jebel Ali, Jeddah, Hamad, Sohar or another named port.
ERW order controls
Verify pipe ends, testing and coating before order release
-
Protected pipe ends and bundle identification Ends and protection
Plain, beveled, threaded or capped ends are confirmed against the purchase order and packing plan.
-
Hydrostatic and weld NDT configuration illustration Hydro and weld NDT
Hydrostatic testing and weld NDT method or coverage follow the ordered standard, API 5L PSL where applicable, and the approved ITP.
-
Black coated pipe stock by lot Surface and coating
Black, oiled, painted or galvanized supply is reviewed by service condition and order requirement.
System certificates
ISO 9001 / 14001 / 45001 scans on file
-
ISO 9001:2015 Quality Management System
-
ISO 14001:2015 Environmental Management System
-
ISO 45001:2018 Occupational Health & Safety
- ISO 9001 Certified Mill
- Your details stay confidential
- Specification review after submission
FAQ
Questions buyers ask before RFQ
What information is needed for ERW pipe quotation?
Standard, grade, OD, wall thickness, length, surface, end finish, quantity and destination port are needed.
Can MTC and inspection documents be provided?
MTC can be provided according to the confirmed standard and order requirement.
Can the pipe be galvanized or painted?
Surface treatment can be reviewed based on the required application and project specification.
Can you quote CIF for ERW pipe?
Yes. Please provide destination port, quantity, length and packing requirement for freight checking.
Related options
Related product specifications
Compare grades, surfaces and finished forms within the same buying path.
Ready to source
Send your ERW Steel Pipe specification today.
Use the RFQ form above, email sales, or start a WhatsApp conversation with standard, grade, OD, wall thickness, length, quantity and destination port.